When using and overhauling the stone crusher, various safety problems are often encountered, so what should be paid attention to? Today, the editor will introduce to you various safety issues in the operation or maintenance of the stone crusher to avoid various accidents. The main points are as follows:

　　1. Please keep the site of the stone crusher clean and tidy, and clean the crushed stones in the machine. Avoid accumulation of stones or other residual stones on walkways, platforms, ladders and conveyor belts, resulting in unobstructed work sites;

　　2. Do not allow any unauthorized personnel to enter the work site or around the work site. Please check the personnel who have been working on your site, and list the personnel if necessary;

　　3. The stone crusher equipment is not allowed to stand on the walkway after it is turned on. The walkway is not used to transport equipment, so do not overload;

　　4. Please do not stand under the crusher equipment that is being hoisted or hoisted, and do not allow any other person to do so. When the equipment is twisted, use a safety hook or a hook with a safety latch, and if necessary, use a spread out wooden pole;

　　5. Check the start-up alarm of the rock crusher and the warning device on the work site every day to ensure that each device can work normally before the equipment is started or operated;

　　6. Please put the safety protection equipment in the designated place to ensure that the personnel at each work site know the storage location and use these equipment correctly;

　　7. Understand the weight limit and error range of the equipment in and around the rock crusher work site;

　　8. Please keep all the surfaces of the stone crusher that your hands and feet come into contact with clean and dry, check whether there is grease on the surface of the equipment, and clean it up immediately if found;

　　9. Observe the rock crusher equipment and its surroundings. If it is found that the sight is obstructed, the management personnel must be equipped with eye-catching warning signs around the equipment, so as to make the staff in the field more vigilant and avoid safety accidents;

　　10. Before removing guards or carrying out inspection and maintenance work, cut off the drive motor of the rock crusher equipment.