The sand making machine needs to crush and reshape materials during the production process. We cannot prevent its wear during the production process, but we can take corresponding measures to reduce the wear and tear of the sand making machine wear parts during the production process. , Thereby prolonging the service life of the wear parts of the sand making machine and making it play an outstanding production effect. The following is a specific introduction. 

1.In order to reduce the wear and tear of the wear parts of the sand making machine and enable it to exert a better production effect, we must carefully check the wear parts before the production of the sand making machine and perform regular maintenance. In this way, the use time of the wear parts of the sand making machine can be correspondingly extended, and the replacement period of the wear parts of the sand making machine can be prolonged, thereby saving the production cost for the user.

2.In the production process of the sand making machine, it is necessary to prevent slight failures, always pay attention to the working condition of the sand making machine, and regularly check the wear condition of each wear part. If the wear is found, it should be corrected and replaced in time. Don't try to reduce repair costs. Neglect to correct and replace the wear parts of the sand making machine to prevent small losses.

3.When replacing wear-resistant parts, go to the original manufacturer to purchase. You can't get cheap and buy inferior wear-resistant parts. In this way, not only the quality of the wear-resistant parts cannot be guaranteed, but it is also easy to form a sand making machine. The phenomenon of mismatch, this will not only save us money, but also bring us unnecessary loss.

4.The sand making machine is suitable for the crushing operation of materials with medium and low hardness. Different types of sand making machines also have corresponding requirements for the feed size of the materials. Therefore, we must strictly follow the sand making machine's production process. Feeding requires production to prevent excessive wear of wear parts of the sand making machine.

 5. An important reason for the loss of the wear parts of the sand making machine during the production process is the lack of smoothness, so we must regularly add smooth grease to ensure that the wear parts of the sand making machine are in an outstanding smooth condition, thereby reducing production Conflicts in the process to achieve the purpose of reducing losses.