The jaw crusher is the * crushing equipment for the entire production line. Its efficiency directly affects the output of the production line. A common failure is the sudden shutdown of the jaw crusher. This phenomenon can cause * damage to the equipment. How to prevent the jaw The sudden shutdown of the crusher?

1. To prevent material clogging, in production, according to the requirements of the jaw crusher for crushing materials, put suitable materials into the crushing cavity evenly. The input materials should not be too much, and the water-containing materials should be pretreated. At the same time, it is strictly forbidden for non-crushing hard objects to enter the crushing cavity, otherwise it will cause * damage to the equipment and even cause the jaw crusher to be forced to s.

2. Regular inspection of equipment parts
1. Check the working voltage. If the working voltage of the jaw crusher is unstable or too low, it is easy to s the equipment. Therefore, the working voltage of the jaw crusher should be checked regularly and adjusted in time to make it meet the requirements of the main machine's working voltage.

2. Check if the parts are loose. If the eccentric shaft tightening bushing becomes loose, the eccentric shaft will jam, which will cause the equipment to s. In addition, if any other parts become loose, it will affect the normal operation of the equipment. Therefore, in the production, attention should be paid to check whether the components are loose to ensure that the components are firmly installed.

3. Check the tightness of the V-belt. If the V-belt is too loose, it will not provide enough power for the operation of the equipment. If it is too tight, the belt will be *ly easy to break, and it will also affect the operation of the jaw crusher. Therefore, before starting the machine every time and during the crushing process of the equipment, pay attention to check whether the belt tightness is appropriate.