The impact crusher undertakes a very important secondary crushing production task, whether it is in the stone production line or the sand production line. The production process is directly into the impact crusher after one crushing, and the hammer and lining are driven by the motor. The board is produced by impact crushing, and the vulnerable parts of the impact crusher are the board hammer and the lining board.

Throughout the entire impact crusher, the * severely damaged is the blower, because the blower needs to continuously beat and smash the stone. Although the blower of the impact crusher is made of high manganese steel, due to the repeated impact and grinding of the material , Wear extremely fast. The repair method is to reverse the position or perform surfacing repair treatment, but it is necessary to pay attention to the weight balance of the rotor when performing the repair treatment.

The impact crusher is a large-scale crushing equipment, the entire casing is made of cast steel, but it is worth everyone’s attention that the impact crusher is strictly prohibited from entering iron during the crushing production, and if there is a problem with the rotor, it can also be welded. Dispose of or replace with a new rotor. After the rotor is repaired, you still need to pay attention to the balance of the rotor. Only in this way can you be able to produce normally.

In general, the impact crusher needs to be used according to its own situation when it is used and produced. It must be produced in strict accordance with the manufacturer's technical indicators. Abnormal use will cause * economic losses in the later stage.