As we all know, jaw crushers and cone crushers are common equipment in stone crushing equipment, and have a very wide range of applications in the market. Jaw crushers are a major crushing equipment, while cone crushers are common medium and fine crushers. Crushing equipment. When customers choose and purchase stone crushing equipment for use in crushing plants, there are actually many factors that should be considered. The four common factors are rock type, rock feed size, required output size range and hourly Crushing capacity requires a good choice. After we know the strength, hardness, product input, output, output and other factors of the rock, we can choose the appropriate crusher equipment based on the above factors.

In the production process of jaw crushers and cone crushers, the maintenance and maintenance knowledge of the crusher equipment is also very important. First, the daily maintenance of the jaw crusher. Today, let’s briefly talk about the lubrication parts and lubrication parts. It is convenient and reliable to lubricate the required parts of the crusher (this machine has four parts, the required lubricant: four shaft bearings). Secondly, pay attention to the following points in the lubrication process:

1. Make sure that the machine is working well and has a long service life, and add lubricant in time (add lubricant every 3-5 days).
2. The lubricating grease needed every 3-6 months to be added to the shaft bearing of the disk is 50%-70% of the total volume of the plate. Before adding grease, please clean the raceway of the rolling bearing with clean gasoline or kerosene. The oil hole should be opened during the cleaning process.
3. According to different climates and regions, choose grease, calcium-based grease, sodium-based grease, calcium-sodium-based grease, if the grease is too dry, use a mixture of thin oil and grease.
4. Grease needs to be added to the bracket and the substrate joint during installation and repair.

Make sure that all bolts are fastened to the foundation every day. If any bolts are loose, it may create a more serious problem for you. Through the huge constant vibration of the machine, the following bolts should be checked every day when performing maintenance.