There are some abnormal phenomena in the cone crusher equipment during the production process. These abnormalities will affect the production of the equipment. This article introduces what are the abnormalities that often occur during the production of the equipment and how to solve them.

    In the production process of cone crusher equipment, there are always some abnormalities. These abnormal phenomena are likely to cause some damage to the equipment during the production process, so that the equipment cannot work normally, so it must be found in time in production. These problems can be solved in time to make the equipment work better. This article introduces the abnormalities that often occur in the cone crusher during the production process.

    The * is that the discharge is not normal. Generally, this phenomenon is caused by the equipment's air volume is not suitable or the speed of the analyzer of the cone crusher is not adjusted properly. The air pipe valve ensures that the particle size of the finished product produced by the equipment is not too large or too small to ensure the quality of the finished product under the normal discharge of the cone crusher equipment;

    Secondly, during the operation, frequent host shutdowns, machine temperature rises, and blower current drops occur. These problems need to be repaired and maintained in time during the production process to prevent damage to the equipment;

    Third, the equipment will be clogged. The cause of this phenomenon may be that the feed is too much, which causes a large amount of material in the main body of the cone crusher to block the diverter disk (air duct), which causes the cone crusher to s during operation. At this time, it is necessary to s and clean up in time;

    Fourth, the exhaust of the pipe is not smooth. The reason for this problem is that the circulating air flow repeatedly rubs against the pipe wall to generate heat, which will cause the pipe wall to be wet, which will cause the material to adhere to the pipe wall of the cone crusher, which will cause the pipe to block. It is necessary to open the residual air pipe valve of the cone crusher.