In the production run, it should pay attention to whether the abnormal internal percussion; Cone crusher the machine is functioning smoothly into the material and the discharge is smooth; pump operation, each point oil flow indicator, oil temperature and oil pressure is normal; check the following each part meets the requirements: the temperature of the oil discharged from the cooler is generally 45-53 ℃; back to the oil temperature is less than 60 ℃; rail pressure of O.08-0.15MPa.

Inspection, adjustment or replacement of the following parts: Check for loose fasteners, if any should be tightened; check for loose lining wear and liner wear to a certain extent, nesting coarsening, we need to improve the dynamic cone adjust the width of the discharge opening, liner wear serious, or will have to replace the fixed cone moving cone liner.

Cone crusher should be installed on a level concrete foundation with anchor bolts, after installation check all parts for loose bolts and host the doors are tight, if requested to tighten, checked, empty load test, test to normal production.

Special attention is carefully checked to maintain some of the common and individual parts, in accordance with the rules operate. In order for the personal safety of users and operators responsible for the broken equipment but also to play a *er effectiveness, resulting in *er efficiency.