ＷhatsApp
Wechat
2019-04-24 15:28:02
The cone crushing effect is good, but anyone who has used the crusher knows that this machine often has a large amount of dust in the process of breaking, which spreads into the air, which not only damages the ecological environment, but also seriously endangers the health of the staff. Therefore, whether the problem of cone crusher dust can be completely solved should be the * concerned thing in the ore processing plant.
Cause analysis of cone crusher dust:
1. Analysis of the dust production point of the crusher The dust source of the cone crusher mainly comes from the feed port, the discharge port and the conveying system.
The material to be processed is crushed and crushed by the crusher, and then sent to the next step through the conveyor. During this process, a large amount of dust is generated, and the concentration is very high. Under the driving of the airflow, the dust source is diffused to the surroundings. Causes serious dust pollution.
2. Causes of dust production at the feed inlet
The cone crusher is not a fully enclosed device. In the feeding process, dust overflow is inevitable, resulting in a relatively high concentration of dust around the feed port.
3. Causes of dust production at the discharge port
The crushed stone needs to enter the conveyor through the discharge port. Due to the difference between the feed port and the discharge port, a part of the stone will flow into the air. At the same time, the stone powder will follow during the movement of the conveyor. Raise and spread to the surroundings.
WhatsApp
Wechat
